Replacement Necks for
Berenguer Dolls & Reborns

These are custom necks for constructing reborn dolls. They are designed especially for the heads on the all-vinyl Berenguer dolls. The necks are available in 3 sizes. Each size is designed differently, as shown.

The necks are intended to be used with cloth doll bodies only, and you do need to use the ultra narrow strap ties to apply the cloth body. Actually, the size of the strap only matters when using the large size neck (the groove is very narrow.) The small and medium size necks could accommodate a wider strap than our ultra narrow ones. But to be on the safe side, you might want to buy some of our straps as well.

To install the neck, you push the head past the black ring, and then the ring keeps the head from coming off again. The medium size neck doesn't have a black ring: there is a pvc "lip" at the top, which holds the head in place.

The small size neck piece has the domed top. It fits the 14" Lots to Love dolls, and the 17" LaNewborn Moments. It also fits the Carry Me LaNewborn but was a little bit loose on them: apparently the Carry Me Doll has a slightly larger neck size.

The small neck fits Berenguer dolls and other dolls with an inside neck diameter of 42mm or 1 5/8 inches opening.

The medium size neck fits dolls with a 1 7/8 inch neck opening, or 47mm. This neck was designed for the new 2008 16 inch LaNewborn dolls especially, but it will probably fit many other dolls as well.

The large neck fits Berenguer dolls and other dolls with an inside neck diameter of 56mm or 2 1/4 inches opening. The large size neck piece fits the 21" Special Edition dolls.